CP-700 HYDRAULIC PUMP PRICE IN NIGERIA

Description

CP-700 HYDRAULIC PUMP PRICE IN NIGERIA

Donnel Technology Limited is a Supplier, Distributor, and Dealer of Hydraulic Pumps and Industrial Tools in Nigeria. Customers looking to buy the CP-700 Hydraulic Pump can contact Donnel Technology Limited for product enquiries, current prices, availability, and wholesale purchasing.

Price in Nigeria: ₦200,000–₦250,000

– Distributor & Dealer: Donnel Technology Limited
– Call/WhatsApp: 08103608430
– Shop Address: F476, Industrial Section, Alaba International Market, Ojo, Lagos, Nigeria.
– Website: Donneltechltd.com

Introduction to the CP-700 Hydraulic Pump

The CP-700 Hydraulic Pump is a high-pressure manual pump designed to power compatible hydraulic tools. It is used in electrical installation, cable crimping, cable cutting, metal punching, and other industrial applications that require hydraulic force.

The pump works by moving hydraulic oil under pressure. This pressure operates a compatible hydraulic tool, such as a crimping head, cutting head, or punching tool. It is especially useful at work sites where electricity is unavailable or where a portable hydraulic power source is preferred.

The CP-700 Hydraulic Pump is a practical option for electricians, electrical contractors, engineers, industrial technicians, and maintenance teams. Buyers in Nigeria should check the pump’s pressure rating, oil capacity, hose connections, and compatibility with their equipment before purchasing.

CP-700 Hydraulic Pump Price in Nigeria

The requested price range for the CP-700 Hydraulic Pump in Nigeria is ₦200,000 to ₦250,000.

The actual price depends on the product version, manufacturer, oil capacity, included accessories, pressure gauge, hose, and supplier terms.

CP-700 Hydraulic Pump Price Guide

Product or Service| Price
CP-700 Hydraulic Pump| ₦200,000–₦250,000
CP-700 pump with pressure gauge| Confirm current price
CP-700 pump with hydraulic hose| Confirm included accessories
Replacement hydraulic hose| Price depends on specifications
Hydraulic pump for wholesale buyers| Request a quotation

The stated price range is an indicative guide based on the requested budget. It is not a verified live quotation from Donnel Technology Limited.

Online listings show that CP-700 pump prices vary. For example, a Nigerian marketplace listing has advertised a CP-700 manual hydraulic pump for ₦230,000, while another listing has shown a different price. These prices may change and may relate to different configurations.

For the current price and availability, contact Donnel Technology Limited on 08103608430.

Factors That Affect the Price

Several factors can influence the price of a CP-700 Hydraulic Pump.

1. Maximum pressure: The pump’s rated pressure determines which compatible tools it can operate.

2. Oil capacity: Different models may have different hydraulic oil capacities.

3. Accessories: A pump supplied with a hose, pressure gauge, and connectors may cost more than a basic unit.

4. Brand and construction: The quality of the pump body, seals, valves, and other components can affect its value.

5. Importation costs: Exchange rates, shipping charges, and other import costs can affect prices in Nigeria.

6. Warranty and support: Warranty coverage and access to replacement parts are important when comparing suppliers.

Key Features of the CP-700 Hydraulic Pump

The CP-700 is designed to provide hydraulic pressure for compatible tools. Exact specifications can vary by manufacturer and product version.

1. High-Pressure Hydraulic Output

Many CP-700 manual pump versions are rated for a maximum output pressure of approximately 700 bar (10,000 psi). Always confirm the rating on the specific unit before use.

This high-pressure output allows a compatible pump to operate suitable hydraulic crimping, cutting, and punching equipment.

2. Manual Operation

The pump is operated using a hand lever. It does not require an electrical power supply during normal manual operation.

This makes it useful at installation sites, workshops, and remote locations.

3. Two-Stage Pumping System

Many CP-700 models use a two-stage hydraulic system.

The low-pressure stage moves a larger volume of oil for faster initial movement. The high-pressure stage delivers the pressure needed to complete the operation.

This design helps improve working efficiency.

4. Hydraulic Oil Reservoir

The pump includes an oil reservoir that supplies hydraulic fluid to the system.

Oil capacity varies by model. Some CP-700 versions specify approximately 700 ml, while other manufacturer catalogues list 900 ml. Confirm the capacity of the exact model you intend to buy.

5. Pressure Control Valve

A suitable pressure control or release valve allows the operator to release hydraulic pressure when the task is complete.

Always follow the manufacturer’s instructions when operating the valve.

6. Hydraulic Hose Connection

The pump connects to compatible hydraulic equipment through a high-pressure hose and suitable fittings.

Check the hose’s pressure rating, length, thread type, and connector design before connecting it to another tool.

7. Pressure Gauge Compatibility

Some CP-700 versions include a pressure gauge, while others may be sold without one.

A gauge helps the operator monitor system pressure. Confirm whether the gauge is included in the package.

8. Durable Pump Construction

CP-700 pumps are available with metal pump bodies and other industrial components designed for hydraulic work.

Service life depends on the quality of the individual model, correct operation, maintenance, and working conditions.

9. Portable Design

Manual hydraulic pumps can be transported between workshops and installation sites.

Check the product’s actual weight and dimensions before purchasing, particularly if the equipment will be moved frequently.

10. Compatibility with Different Hydraulic Tools

Depending on its design, a CP-700 pump may operate compatible crimping heads, cutting heads, punching heads, and other hydraulic tools.

Compatibility must be verified before connecting equipment.

Uses of the CP-700 Hydraulic Pump

The CP-700 Hydraulic Pump supports several applications when paired with compatible hydraulic tools.

1. Hydraulic Cable Crimping

The pump can power a compatible hydraulic crimping head used to compress suitable cable lugs and connectors.

This is useful for electricians and electrical contractors working on cable termination.

2. Electrical Cable Cutting

When connected to a compatible hydraulic cable cutter, the pump can provide the force needed to cut approved cable types.

The cutter must be rated for the cable material and diameter.

3. Hydraulic Punching

The pump can operate compatible hydraulic punching tools used to create holes in approved metal sheets, panels, and other materials.

4. Busbar Processing

Some compatible hydraulic tools use a hydraulic pump for punching or other processing operations involving electrical busbars.

The correct tool and accessories must be selected for the busbar material and thickness.

5. Industrial Maintenance

Maintenance teams may use hydraulic pumps to power compatible tools during equipment repair and servicing.

6. Electrical Panel Assembly

The pump can support suitable hydraulic crimping or punching operations used in electrical panel manufacturing.

7. Power Distribution Projects

Electrical contractors may use a compatible pump and crimping head to prepare cable connections for distribution equipment.

8. Construction Work

Certain hydraulic tools used on construction sites can be operated by a suitable manual hydraulic pump.

The pump must be matched to the tool’s hydraulic requirements.

9. Workshop Applications

Electrical and industrial workshops may use the CP-700 to operate different compatible hydraulic tools.

10. Field Installation Work

Because manual operation does not require mains electricity, the pump can be useful at sites where electrical power is limited.

Benefits of the CP-700 Hydraulic Pump

Reduced Dependence on Electricity

The manual pump can operate without a mains electrical supply. This is useful for fieldwork and remote installation sites.

High Hydraulic Force

A suitably rated pump can provide the pressure required by compatible heavy-duty hydraulic equipment.

Improved Work Efficiency

The two-stage pumping mechanism used by many models can help speed up the initial movement of a compatible hydraulic tool.

Flexible Applications

A compatible pump may be used with different hydraulic heads, depending on its design and approved connections.

Portable Operation

Manual hydraulic pumps can be transported to workshops, construction sites, and industrial facilities.

Potential Long-Term Value

A properly maintained pump can provide long service. Regular inspection and the correct hydraulic oil help protect its components.

Better Control of Hydraulic Operations

When the model includes a suitable pressure gauge, the operator can monitor pressure during use.

Suitable for Professional Users

The CP-700 is an option for electrical contractors, technicians, maintenance teams, and industrial users who need a manual hydraulic power source.

Compatibility of the CP-700 Hydraulic Pump

Before buying the CP-700 Hydraulic Pump, confirm that it is compatible with the hydraulic tool you intend to operate.

Hydraulic Pressure

The pump’s maximum pressure must meet the tool’s requirements without exceeding the tool’s rated limit.

Never assume that all tools designed for hydraulic operation can withstand the same pressure.

Hydraulic Hose

Check the hose’s working pressure, length, fittings, and condition.

Do not use a damaged hose or one with an insufficient pressure rating.

Coupler and Thread Type

Confirm that the pump’s connector matches the tool’s hydraulic inlet. Some models use a 3/8-inch connection, but this should not be assumed for every version.

Hydraulic Oil

Use the hydraulic oil specified by the manufacturer. Different pumps may require different oil grades.

Compatible Crimping Heads

If the pump will be used for cable crimping, confirm that the crimping head is designed to operate with the pump’s pressure and oil delivery characteristics.

Compatible Cutting Heads

For cable cutting, ensure the cutter is approved for the pump and the intended cable type.

Punching Tools

For hydraulic punching, confirm the required pressure, hose fittings, and operating specifications.

Important: Do not connect tools based on the CP-700 model name alone. Confirm pressure ratings and fittings before operation.

CP-700 Hydraulic Pump Datasheet

The following table provides a general product reference. Specifications vary by manufacturer, so the exact model should be verified before purchase.

Specification| Details
Product Name| CP-700 Hydraulic Pump
Product Type| Manual hydraulic hand pump
Main Function| Supplies hydraulic pressure to compatible tools
Operating Method| Hand-operated
Maximum Output Pressure| Up to 700 bar on many versions
Pressure Equivalent| Approximately 10,000 psi
Pumping System| Two-stage on many versions
Oil Capacity| Approximately 700–900 ml, depending on model
Low-Pressure Oil Output| Model dependent
High-Pressure Oil Output| Model dependent
Hydraulic Hose| Confirm whether included
Pressure Gauge| Depends on the supplied version
Hydraulic Connections| Confirm with manufacturer
Compatible Equipment| Suitable crimping, cutting, punching, or other approved hydraulic tools
Dimensions| Confirm with supplier
Weight| Confirm with supplier
Warranty| Confirm with supplier
Indicative Price in Nigeria| ₦200,000–₦250,000
Supplier| Donnel Technology Limited

Datasheet Notes

Manufacturer catalogues list different CP-700 versions and specifications. One catalogue lists 700 bar maximum pressure and 900 ml oil capacity, while other versions specify different reservoir sizes.

This table is a buying guide, not an official datasheet for every CP-700 pump. Request the manufacturer’s documentation to confirm the specifications of the unit being sold.

How to Use the CP-700 Hydraulic Pump

Correct operation helps protect the pump and connected equipment.

Step 1: Inspect the pump. Check the body, handle, oil reservoir, hose, fittings, and release valve for damage or leaks.

Step 2: Check the oil level. Follow the manufacturer’s instructions for checking the hydraulic oil level.

Step 3: Connect the hydraulic tool. Ensure the hose and couplers are compatible and securely fitted.

Step 4: Position the tool. Place the connected crimping, cutting, or punching tool correctly for the task.

Step 5: Operate the handle. Pump the handle according to the manufacturer’s instructions. Monitor the equipment during operation.

Step 6: Stay within the pressure limit. Never exceed the rated pressure of the pump, hose, fittings, or connected tool.

Step 7: Release the pressure. Use the prescribed pressure-release procedure before disconnecting the hose.

Step 8: Clean and store the pump. Keep the equipment clean and store it in a dry place.

Safety Precautions

Hydraulic pressure can cause serious injury.

– Never touch or attempt to stop a hydraulic oil leak with your hand.
– Do not disconnect a pressurised hose.
– Do not exceed the rated working pressure.
– Keep the equipment away from unauthorised users.
– Wear suitable eye protection.
– Follow the manufacturer’s inspection and maintenance schedule.

Where to Buy the CP-700 Hydraulic Pump in Nigeria

Customers looking for the CP-700 Hydraulic Pump can contact Donnel Technology Limited for enquiries about price, availability, product specifications, and wholesale purchasing.

The company is located at Alaba International Market in Ojo, Lagos, where customers can enquire about hydraulic pumps and related electrical or industrial equipment.

Donnel Technology Limited Contact Details

Company: Donnel Technology Limited
Product: CP-700 Hydraulic Pump
Price Range: ₦200,000–₦250,000
Call/WhatsApp: 08103608430
Shop Address: F476, Industrial Section, Alaba International Market, Ojo, Lagos, Nigeria.
Website: Donneltechltd.com

Why Contact Donnel Technology Limited?

– Enquire about the current selling price.
– Confirm stock availability.
– Check the pump’s pressure rating and oil capacity.
– Ask whether a hose and pressure gauge are included.
– Confirm compatibility with your hydraulic crimping or punching tool.
– Request wholesale prices for bulk orders.
– Ask about warranty terms and after-sales support.
– Discuss delivery arrangements to other states in Nigeria.

Contact the supplier before travelling or making payment. Confirm the exact model, package contents, and final price.

10 Related Hydraulic and Electrical Tools

CP-180 Hydraulic Pump, CP-700 Hydraulic Pump with Pressure Gauge, FYQ-500 Hydraulic Crimping Tool, FYQ-500 + CP-180 Hydraulic Crimping Tool, YQK-300 Hydraulic Crimping Tool, YQK-400 Hydraulic Crimping Tool, EZ-630 Battery Operated Crimping Tool, EZ-105 Battery Operated Cable Cutter, CH-70 Hydraulic Puncher, 3-in-1 Hydraulic Busbar Bending Cutting and Punching Machine.

Frequently Asked Questions

1. What is the price of the CP-700 Hydraulic Pump in Nigeria?

The requested price range is ₦200,000–₦250,000. Contact Donnel Technology Limited to confirm the current price.

2. What is the CP-700 Hydraulic Pump used for?

It supplies hydraulic pressure to compatible crimping heads, cutting heads, punching tools, and other approved hydraulic equipment.

3. Does the CP-700 require electricity?

Manual CP-700 models operate using a hand lever and do not require mains electricity during normal operation.

4. What is its maximum pressure?

Many CP-700 manual pump models are rated up to 700 bar, or approximately 10,000 psi. Verify the exact model before use.

5. Does the pump come with a pressure gauge?

Some versions include a gauge, while others may not. Confirm the supplied accessories before purchasing.

6. Can it operate a hydraulic crimping tool?

Yes, if the pump and crimping head are designed to work together and have compatible pressure ratings and fittings.

7. Where can I buy the CP-700 in Lagos?

Contact Donnel Technology Limited at F476, Industrial Section, Alaba International Market, Ojo, Lagos, Nigeria.

8. Can I order the pump wholesale?

Contact the supplier on 08103608430 to enquire about bulk orders and wholesale prices.

9. How do I maintain the pump?

Inspect it for leaks, use the recommended hydraulic oil, keep its fittings clean, and follow the manufacturer’s maintenance schedule.

10. Can customers outside Lagos order the pump?

Customers in other Nigerian states can contact Donnel Technology Limited to ask about delivery availability and shipping charges.

Conclusion

The CP-700 Hydraulic Pump is a useful piece of equipment for professionals who need a manual hydraulic power source for compatible crimping, cutting, punching, and industrial tools. Its portability and high-pressure operation make it suitable for many workshop and field applications when correctly matched to the connected equipment.

The requested price range in Nigeria is ₦200,000 to ₦250,000. Before purchasing, confirm the exact model, pressure rating, oil capacity, included accessories, and compatibility with your hydraulic tools.

For product enquiries, current prices, and wholesale purchases, contact Donnel Technology Limited, located at F476, Industrial Section, Alaba International Market, Ojo, Lagos, Nigeria.

Call or WhatsApp: 08103608430

Choose a pump that meets your equipment’s requirements and always follow the manufacturer’s safety and maintenance instructions.

SEO Meta Short Description

Buy the CP-700 Hydraulic Pump in Nigeria for ₦200,000–₦250,000. Contact Donnel Technology Limited on 08103608430 for prices, availability, and wholesale enquiries.

20 SEO Meta Tags                                      CP-700 hydraulic pump, CP-700 pump price Nigeria, hydraulic pump Nigeria, manual hydraulic pump, CP-700 hand pump, hydraulic pump price, hydraulic pump Lagos, hydraulic crimping pump, hydraulic pressure pump, hydraulic pump with gauge, high pressure hydraulic pump, hydraulic tools Nigeria, hydraulic equipment supplier, industrial hydraulic pump, hydraulic pump dealer, hydraulic pump wholesale, cable crimping pump, hydraulic punching pump, Donnel Technology Limited, Alaba International Market Lagos